Jump to content


File Information

  • Submitted: Mar 26 2012 09:10 AM
  • Last Updated: Mar 26 2012 09:10 AM
  • File Size: 21.41MB
  • Views: 37135
  • Downloads: 29,317
  • Compatible with 10.5.x Leopard: Yes
  • Compatible with 10.6.x Snow Leopard: Yes
  • Compatible with 10.7.x Lion: Yes
  • Compatible with 10.8.x Mountain Lion: Yes
  • Compatible with 10.9.x Mavericks: Yes

Download Clover v2 r1888 pkg + Win_USBTools 1.0

- - - - -

The Official download site.

Install to MBR+GPT on Mac: use Clover_v2_rXXXX_pkg.zip
Install to GPT EFI on Mac: use EFI_Tools_Clover_v2_rXXXX_EN.zip
Install to USB Fat32 on Win: use Win_USBTools-Fat32_Clover_v2_rXXXX.zip

Q/A If can't boot, set option FixDsdtMask = 0x0000 from GUI,
...... or ACPI/FixDsdtMask = 0x0000 in /EFI/config.plist.

How to install InstallESD.dmg to GPT. since r480.

First, you need to Restore InstallESD.dmg to disk by using Disk Utility.
Then, follow the stage 1 and stage 2 to install 10.7.x or 10.8.x to GPT, and auto-create the Recovery HD used for iCloud.

Stage 1

1.Remove kernelcache in InstallESD.dmg/Library/Preferences/SystemConfiguration/com.apple.Boot.plist.
Kernel Cache remove this line.
xxxxxxxxxxxxx remove this line.
2.Copy BaseSystem.dmg/System/Library/Extensions to partition of InstallESD.dmg and add other kexts (FakeSMC.kext).
3.Clover select to "Boot Mac OS X with extra kexts (skips cache)", and follow the installation with restart first time.

Stage 2

1.Remove kernelcache in target partition's /OS X Install Data/com.apple.Boot.plist.
Kernel Cache remove this line.
xxxxxxxxxxxxx remove this line.
( 10.7.x is /Mac OS X Install Data/com.apple.Boot.plist )
2.Copy InstallESD.dmg/System/Library/CoreServices and /mach_kernel to target partition's / .
3.Copy BaseSystem.dmg/System/Library/Extensions to target partition's / and add other kexts (FakeSMC.kext).
4.Boot to "OS X Install" with "Boot Mac OS X with extra kexts (skips cache)" and finish the installation.
(10.7.x is "Mac OS X Install")

Install Clover by using boot1h2 or boot1f32alt, after test done with 2 seconds.
Default boot to boot Clover EFI 64bit,
Press key 1 to boot1 for Chameleon
Press key 3 to boot3 for Clover EFI 32bit,
Press key 6 to boot6 for Clover EFI 64bit,

Clover EFI bootloader come from Slice @ ProjectOSX.
package by crazybirdy.

PKG will install for MBR as below.
 /EFI/ (folder)
and you may need to modify the setup files, refer to /EFI/config-sample.plist.

Put Extra kexts to /System/Library/Extensions and rebuild kernelcache.
Suggest to install Clover EFI to a SD card or flash drive with MBR HFS+, it works fine.
Only test on 64bits CPU, both 32bits and 64bits work fine with arch=i386 and arch=x86_64.

How to feedback to ProjectOSX:
Just take the Quiz to unlock access, and reply the Topic.

Any feedback, please follow the original web site.
Install boot1h2 to boot with Clover or Chameleon.

Is is possible to set up Clover on a Flash drive and boot from that until you get your config set up right?
Yes, I try to install Clover to a 32MB SD card with HFS+, it works fine.
32 bits works?
Only test on 64bit CPU, both 32bit and 64bit work fine with arch=i386 and arch=x86_64.
tested on p4@3,0hz it runs and recognized hw ok(frecuency/ram/hd/), but when press enter on continue just re-load the same screen, i will try on amd 455 and a6, any sugesstions? or irc channel to support/contributions?
i was forgetting to tell you, it was on 8gb usb 2,0 hfs+ single partition.
I have core 2 due and work fine, not know your problem, any feedback, suggest to follow the original web site.
спасибо! очень быстро и без ошибок грузит 10.7.3 !!!!:very_drunk:
Slice, respect!
update to rev 344.